Clarity Wildcat WN-4030-S Service Manual page 27

button menu chain goes to menu:
SOURCE
Source Select, then
if Source1 or Source2 is selected, then
Frequency/Phase
Black Level
White Level
Mode Detect
or if Digital is selected, then
Mode Detect
or if C-Video or is S-Video selected, then
Video Controls
Mode Detect
button menu chain goes to menu:
SETUP
Source Select, then
if Source1 or Source2 is selected, then
Frequency/Phase
Black Level
White Level
Color Balance
Position
Save Config
or if Digital is selected, then
Color Balance
Position
Save Config
or if C-Video or is S-Video selected, then
Video Controls
Color Balance
Position
Save Config
button menu chain goes to menu:
LEVEL
if the currently selected source is Source1
or Source2, then
Black Level
White Level
Color Balance
or if the currently select source is Digital, then
"Input level controls do not apply to digital
sources", then
Color Balance
or if the currently selected source is C-Video or
S-Video, then
Video Controls
Color Balance
button menu chain goes to menu:
SAVE
Save Config
Recall Config
Reset Config
/ button menu chain goes to menu:
SIZE POS
Position
Zoom Control
19