Steps 1. & 2.: LCD alignment motor
assembly. Arrows point to screws holding
it in place and the LCD temperature sen-
sor cable.
Step 4.Using thumbs to gently release the
clamp on the LCD ribbon cable.
After Steps 7. & 8.: Optical engine, main
cover and lens removed.
Step 3.Removing the LCD ribbon cable inter-
face board.
Steps 5. & 6.: Optical engine top view: Arrows
show locations of 9 screws to be removed.
Step 9.Pinching top half of ribbon cable to
allow it to slide under the engine frame.
Step 10.Pinching bottom half of ribbon cable back on
itself to allow it to slide under the engine frame. LCD par-
tially removed
93