Repeater Support - Gigaset A510IP User Manual

Hide thumbs Also See for A510IP:
Table of Contents

Advertisement

Setting the base
Please note
u
The firmware update can take up to six minutes, depending on the quality of
your DSL connection.
u
When updating from the Internet, checks are made to ensure that no newer
version of the firmware exists. If this is not the case, the operation is termi-
nated and a message is issued to that effect.
u
During the update, the handsets temporarily lose their connection to the
base. The base is restarted.
u
You can also reset the firmware via the Web configurator, i.e., reload the pre-
vious firmware version or the firmware version that was loaded as default to
the phone.
Updating firmware automatically
Your phone will check daily whether a newer firmware version is available from the
Internet on the configuration server. If firmware updates are available, the message
New firmware available is displayed in the idle display of the handset.
f
§Yes§
~
The firmware is uploaded to your phone.
Please note
If the telephone is not connected to the Internet at the time when the check for
new firmware is to be performed (e.g., because the router is deactivated), the
check is performed as soon as the phone is reconnected to the Internet.
You can deactivate the automatic version check via the Web configurator.

Repeater support

You can increase the range and signal strength of your phone using a repeater. You
will need to activate repeater mode. This will terminate any calls that are in progress
at the time.
Prerequisite: Eco Mode(+) is deactivated.
¤
§Menu§
§OK§
§OK§
Please note
u
Repeater support and Eco Mode/Eco Mode+
other out, i.e., both functions cannot be used at the same time.
u
The default encrypted transmission setting is deactivated when repeater
mode is activated.
112
Press the key.
Press the display key to confirm the subsequent prompt.
If the system PIN is not 0000: enter the system PIN and press
¤
Ï Settings
System
Press the display key to activate or deactivate repeater mode (³= on).
Press the display key to confirm the prompt.
¤
Repeater Mode
¢
(
§OK§
page 93)
cancel each
.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents