Gigaset A510IP User Manual page 29

No Internet connection:
The phone requires an Internet connection for you to register your telephone
with a VoIP provider. If a connection cannot be made, one of the following mes-
sages is displayed:
u
If the phone cannot establish a connection to the router, the message IP
address not available is displayed.
Check the plug connection between the router and the base and check the
settings on the router.
Your phone is preconfigured for dynamic assignment of the IP address. In
order for your router to "recognise" the phone, dynamic IP address assign-
ment must also be activated on the router, i.e., the router's DHCP server must
be activated. If the DHCP server cannot or should not be activated, you must
assign a fixed IP address to the phone
u
If the phone cannot establish a connection to the Internet, the message
Internet conn. not available is displayed.
The IP server may be temporarily unavailable. In this case, try to make a con-
nection again later.
Otherwise, check the plug connection between the router and the modem
or DSL connection and check the settings on the router.
¤
§OK§
Press to close the VoIP wizard.
You will then need to call up the wizard later via the menu to configure the IP
connection.
Entering the auto configuration code
Enter auto
conf. code:
5
Del.
All data required for VoIP telephony is loaded directly from the Internet to your
phone.
When all the data has been successfully loaded onto your phone, IP account is reg-
istered appears on the display.
¤
For further information, please see
¢
(
¤
Using the keypad, enter the auto configu-
ration code you received from the pro-
vider (max. 32 characters).
If you enter an incorrect character, you
can delete it by pressing the left display
key.
OK
¤
Press the key below
screen.
"2. Connection
page 108).
§OK§
on the display
wizard", page
First steps
31.
27