Ending A Call; Accepting A Call - Gigaset A510IP User Manual

Ending a call

a

Accepting a call

An incoming call is indicated in three ways: By ringing, by a display on the screen
and by the flashing speaker key d.
Please note
Only calls to the receive connections assigned to the handset are signalled.
The following applies in particular if VoIP connections are configured on your
base:
u
If you have not explicitly assigned the receive connections on your phone, all
incoming calls are signalled on all registered handsets. As standard all avail-
able connections are assigned to all handsets as receive connections.
u
If you have performed an explicit assignment between handsets and receive
connections but not assigned one connection to any handset as the receive
connection, calls on this connection will not be signalled on any handset.
u
If a call cannot be assigned to any connection on the phone, this call is sig-
nalled on all handsets (e.g., a connection established via an IP address).
You can answer the call by:
¤
Pressing the talk key c.
¤
If the handset is in the charger and the Auto Answer function is activated
¢
( page
from the charger.
¤
For a call to the fixed line connection: press the
To deactivate the ringtone, press the
long as it is displayed on the screen.
If you press the end call key a or the
is rejected. If you press the end call key a for a call to the fixed line connection, the
ringtone is merely deactivated, as for
Press the end call key.
103), the handset automatically accepts the call when you remove it
§Accept§
§Silence§
display key. You can accept the call as
§Reject§
display key, a call to a VoIP connection
§Silence§
.
Making calls
display key.
47