Gigaset A510IP User Manual page 57

§OK§
Press the display key.
Internal call divert is only single-stage i.e., if calls for the handset are diverted to a
different handset (e.g., MT1) on which a call divert is also active (e.g., to MT2), this
second call divert is not executed. The calls are signalled on handset MT1.
Please note
u
Any call for the handset that has been diverted is entered in the call lists.
u
If a call to a receive connection that is only assigned to the handset is
diverted to a handset that is not available (e.g., the handset is deactivated),
the call is rejected after a short time.
Activating/deactivating call waiting for external calls
If the function is activated, during an external call you will hear a call waiting tone
to signal that another external caller is trying to get through. If you have CLIP, the
number of the waiting caller or the corresponding directory entry is shown in the
display. The caller will hear the ringing tone.
When call waiting is deactivated, the caller will hear the busy tone if you are already
making a call and you are the only party assigned to this connection.
Activating/deactivating call waiting
Prerequisite for calls via VoIP: Parallel VoIP connections are permitted on your tel-
ephone (default setting; setting can be changed via the Web configurator).
¤
Ç Select Services
§Menu§
r
Select On/Off to activate/deactivate call waiting.
¤
Press the display key
Call waiting is activated/deactivated for all connections to the telephone and all
registered handsets.
To activate/deactivate the function for the fixed line connection, the phone estab-
lishes a connection to the exchange to send the relevant code.
¤
After confirmation from the fixed line, press the end call key a.
Activating/deactivating call transfer – ECT (Explicit Call Transfer –
VoIP)
If the function is activated, you can connect two externalcallers on a VoIP connec-
tion with each other by pressing the end call key a
that you are making an external call via one of your VoIP connections and start an
external consultation call.
You can activate/deactivate this function via your handset.
¤
Ç Select Services
§Menu§
Transfer (ECT)
Select and press
Please note
You can use the Web configurator to change further settings for the call transfer
on a VoIP connection
¤
Call Waiting
§Send§
.
§OK§
(³ = on).
¢
( page 137).
Making calls using select services
¢
( page 57). This assumes
55