Table of Contents
Advertisement
Gigaset S440 / SWZ-engl nur fuer Internet Swisscom / xxxxxx / settings_bs_hs.fm / 21.07.2006
Base station settings
Base station settings
The base station settings are carried out
using a registered handset.
Protecting against unauthorised
access
Protect the system settings of the base sta-
tion with a PIN known only to yourself.
The system PIN must now be entered
when, for example, registering/de-regis-
tering a handset to/from the base station
or when restoring the default settings.
Changing the system PIN
You can change the 4-digit system PIN set
on the base station to a 4-digit PIN which
is known only to you.
Caution:
Memorise the new system PIN well! If you for-
get it, the phone will require expert interven-
tion from Swisscom at an extra charge.
¢
¢
v
Ð
Base
~
Enter current PIN if necessary
und press
~
Enter new system PIN. For
security reasons the PIN is
shown as four stars ( **** ).
s ~
Jump to the next line, re-enter
new system PIN and press
a
Press and hold (idle status).
46
¢
System PIN
.
§OK§
§OK§
Repeater support
With a repeater you can increase the range
and reception strength of your base sta-
tion. First you must activate the repeater
mode. This would terminate any calls,
which are currently running through the
base station.
Requirement: A repeater is registered.
¢
¢
v
Ð
Base
¢
Repeater Mode
Press the display key.
§Yes§
When repeater mode is active, the menu
item is marked with ‰ .
Restoring default settings
to base station
When resetting, handsets remain regis-
tered. Following settings are not reset:
u
System PIN
u
Setting "First ringtone suppressed"
u
SMS info services
You will find an overview of the default
settings in the appendix, page 51.
¢
¢
v
Ð
Base
~
Enter the system PIN and
press
Press the display key.
§Yes§
Cancel the restoring process by pressing
.
a or the display key
¢
Add. Features
¢
Base Reset
.
§OK§
.
§No§
Advertisement
Table of Contents
Troubleshooting
