Setting Pauses - Gigaset A510IP User Manual

Connecting the base station to the PABX
For:
Specify when the access code should also be dialled when dialling via VoIP:
Call Lists
For dialling from the SMS list, missed calls list or accepted calls list.
All Calls
For all numbers dialled on the handset.
Off
No access code should be dialled first for calls via a VoIP connection.
§OK§
Please note
The access code never prefixes any emergency numbers or SMS service centre
numbers.

Setting pauses

Changing the pause after line seizure
You can change the length of the pause that is inserted between pressing the talk
key c and sending the number.
§Menu§
P#Q5#1L
~
Changing the pause after recall key
You can change the length of the pause if your PABX requires this (refer to the user
guide for your PABX).
§Menu§
P#Q5#12
~
Changing a dialling pause (pause after access code)
§Menu§
P#Q5#11
~
To insert a dialling pause: press and hold S for 2 seconds. A P appears in the dis-
play.
116
Press the display key.
Open main menu.
Press keys in sequence.
Enter number for the length of the pause (1 = 1 sec.; 2 = 3 secs;
3 = 7 secs) and press
Open main menu.
Press keys in sequence.
Enter a number for the length of the pause (1 = 800 ms; 2 = 1600 ms;
3 = 3200 ms) and press
Open main menu.
Press keys in sequence.
Enter a digit for the length of the pause (1 = 1 sec.; 2 = 2 sec.; 3 = 3 sec.;
4 = 6 sec.) and press
§OK§
.
§OK§
.
§OK§
.