Gigaset A510IP User Manual page 56

Making calls using select services
¤
§Menu§
A list containing the configured and activated receive connections for your phone
and Int is displayed.
¤
Select the receive connection for which you want to activate or deactivate call
divert, and press
¤
You can enter data in the following fields:
Status
Press right/left on the control key to activate/deactivate call divert.
Phone number
Enter the number to which the call is to be diverted. You can specify a different
fixed line, VoIP or mobile number for every connection.
When
Select All Calls/No Answer/When Busy.
All Calls: Calls are diverted immediately i.e., no more calls to this connection are
signalled on your phone.
No Answer: Calls are diverted if no one accepts the call within several rings (VoIP
only).
When Busy: Calls are diverted when your line is busy (VoIP only).
§Send§
For diverting calls from the fixed line:
A connection is established to the telephone network to activate/deactivate call
divert.
¤
After confirmation from the fixed line, press the end call key a.
Please note
Diverting calls to your phone numbers can result in additional costs. Please
consult your provider.
Diverting calls internally
You can divert the signalling of all incoming external calls for your handset to
another handset.
¤
§Menu§
Int
¤
You can enter data in the following fields:
Status
Press right/left on the control key to activate/deactivate call divert.
To handset
Press right/left on the control key to select the target handset.
No HS is displayed if internal call divert has not been set previously or if the pre-
viously set handset is no longer registered.
Ring delay
If you prefer to have a delay before the call is diverted, select the length of the
delay at this point (None, 10 sec., 20 sec. or 30 sec.). If you select None, the call
is not signalled on the handset and is diverted immediately.
54
¤
Ç Select Services
§OK§
.
Press the display key.
¤
Ç Select Services
Select and press
Call Divert
Call Divert
§OK§
.