Table of Contents
Advertisement
4
Operation
Using Advanced Features (Options)
Using Advanced Features (Options)
The advanced features of the centrifuge allow for:
• performing quality control runs, changing speed or time control ranges,
• changing acceleration/deceleration or overtemperature alert settings,
• linking together programmed run parameters, and
• saving run parameters to program memory for simple recall.
Advanced feature selection is usually reflected by LED option status indicators. When a feature has
been selected, the corresponding indicator will be lit (although specific settings for several features
can only be checked by reselecting the feature in the options screens). If changes to advanced feature
selection are required (other than to RPM/RCF or TIME/HOLD/ACE status, which are accessible
through primary function keys). The features are accessed by pressing MENU and then pressing
ENTER until the selection screen of the particular feature appears in the SET DISPLAY.
• The MENU key accesses advanced feature options listed below it, plus other features such as
saving parameters to memory.
Press the MENU key to enter the advanced features. After that pressing 1 accesses a secondary screen
to view or enter values, plus confirm option selection. Pressing 0 deselects options. Pressing ENTER
steps through options without changing selections or settings, and on secondary screens, enters
values to select the option. Pressing MENU exits the options and returns to the SET DISPLAY
without entering/selecting a flashing value.
4-8
RC B
IOS
Thermo Scientific
Advertisement
Table of Contents
