Concox GPS Electric Cars Positioning Terminal User Manual page 18

After the command is carried out, it will reply "Cut off the fuel supply: Success!
Speed:0 Km/h". If the command didn't carry out, it will reply the reason about fail
to carry out.
Note: To ensure the safety of the driver and the car, this command is valid only
under two conditions: the GPS is located; the speed is less than 20km/h
6.7 Restoring Oil
1. Via platform
When the alarm is off, sending recover oil commands manually. Device will restore
oil supplying, and vehicle will work normally again.
Platform account password is needed when sending oil cut off command.
2. Via SMS
Only center number can send the command to the device to restore oil.
The format is: RELAY,0#
After the command is carried out, it will receive "Restore fuel supply: Success!"
6.8 Over Speed Alarm
When the car is moving over a limited speed in average in a limited time period,
then the device will send over speed alarm SMS to user.
To turn on the over speed function, please send below SMS command:
SPEED,ON,Time,Limited speed,way of alarm#
Time range（Second）: 5-600s (default as 20s).
Limited speed range（km/h）: 1-255, default：120.