Concox GPS Electric Cars Positioning Terminal User Manual page 17

terminal will send vibration alarm message to SOS numbers with the Chinese
address, and call the SOS numbers in cycle. If nobody answers, it will stop calling
after 3 loops.
If the Chinese address can not be acquired for certain reason, the terminal will send
a message with the website link to the SOS numbers.
Example:
Sensor Alarm！<11-23 14:53>,
http://maps.google.com/maps?q=N22576713,E113.916585
Note:
1. The SOS numbers should be preset.
2. Send "SENALM, OFF#" to turn off the vibration alarm if don't need.
6.6 Oil cut-off
1. via platform
Send oil cut-off command on platform. To make sure the security of vehicle, tracker
can only indicate to cut off oil when GPS is in valid position status, and the speed is
less than 20KM/H or in static. Platform account password is needed when sending
oil cut off command.
2. Via SMS
Firstly, you should set a center number. Please refer to 5.4.
Only center number can send the command to the device to cut off and restore oil.
The format is: RELAY,1#