Aastra 6739i User Manual page 90

Options Key
The following Aastra Web UI screen shows the states you can configure for your phone.
The following table describes the states available to configure for the softkeys.
State
idle
connected
incoming
outgoing
busy
The following table identifies the applicable default states for each softkey type on the IP phone
Key Function
None
Line
Speed Dial
Do Not Disturb
Busy Lamp Field (BLF)
BLF List
Auto Call Distribution (ACD)
Directed Call Pickup (DCP)/
Group Call Pickup (GCP)
XML
Flash
Park
Pickup
Call Forward
BLF/Xfer
Speed Dial/Xfer
Speed Dial/Conf
Phone Lock
84
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Description
The phone is not being used.
The current line is in an active call (or the call is on hold).
The phone is ringing.
The user is dialing a number, or the far-end is ringing.
The current line is busy because the line is in use or the line is set as "Do Not Disturb".
Description
All states disabled.
idle, connected, incoming, outgoing, busy
idle, connected, incoming, outgoing, busy
idle, connected, incoming, outgoing, busy
connected
connected
idle
idle, connected, incoming, outgoing, busy
connected
All states disabled
connected
idle, outgoing
idle, connected, incoming, outgoing, busy
connected
idle, connected, incoming, outgoing, busy
idle, connected, incoming, outgoing, busy
All states disabled.
Configurable Softkey States
41-001317-05 REV00 – 03.2011