Aastra 6739i User Manual page 113

3. Press the service you want to access. Message services display to the screen after selecting the service. For user
input services, follow the prompts as appropriate.
4. To exit from the "Services" menu, press the Services key again.
Flash Softkey
You can set a softkey to generate a flash event when it is pressed on the 6739i. You do this by setting the softkey to "flash".
The IP phone generates flash events only when a call is connected and there is an active RTP stream (for example, when
the call is not on hold).
Configuring a Flash Softkey
Use the following procedure to configure a Flash key on the 6739i IP Phone.
Aastra Web UI
1. Click on Operation->Softkeys and XML.
or
1. Click on Operation->Expansion Module.
Softkeys
2. Select from "Key 1" through "Key 55".
3. In the "Type" field, select Flash.
4. In the "Label" field, enter a label for the Flash key.
Expansion Module Keys
5. Select an expansion module key.
6. In the "Type" field, select Flash.
7. In the "Label" field, enter a label for the Flash key.
8. Click Save Settings.
Park/Pickup Softkeys
The 6731i phone has a park and pickup call feature that allows you to park a call and pickup a call when required. The IP
phones support the Park/Pickup feature on the Asterisk, BroadWorks, and Sylantro servers.
The park/pickup feature performs as follows:
• When a call comes in and you pickup the handset, you can press the applicable "Park" key to park the call.
• After the call is parked, you can press the "Pickup" key, followed by the applicable value to pickup the call.
Administrators can configure the park and pickup keys for any line using the configuration files or the Aastra Web UI.
Users can make changes to customize the label of the park/pick up keys using the Web UI.
Note:
Contact your System Administrator for more information about using the Park/Pickup feature.
41-001317-05 REV00 – 03.2011
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Options Key
107