Aastra 6739i User Manual page 119

6. In the "Line" field, select the line for which you want to use the key functionality.
Valid values are 1 through 9.
7. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
Expansion Module Keys
8. Select an expansion module key.
9. In the "Type" field, select BLF/Xfer.
10. In the "Label" field, enter a label for the BLF/Xfer key.
11. In the "Value" field, enter the monitored extension or the extension to transfer calls to (for example, "35").
12. In the "Line" field, select the line for which you want to use the key functionality.
Valid values are 1 through 9.
13. Click Save Settings.
Speed Dial/Xfer Softkey
The Speed Dial key allows a number to be dialed quickly by pressing one key configured for speed dialing. The Xfer key
allows a call to be transferred to other recipients blindly or consultatively. The Speed Dial/Xfer key combines the Speed
Dial and Xfer key's functionality together allowing the user to transfer calls or use speed dial with one key.
Speed Dial/Xfer Key Requirements and Functionality
The Speed Dial/Xfer key has the following capabilities:
• Speed Dial/Xfer and Speed Dial
When the phone is in the "Idle" state, pressing the Speed Dial/Xfer key causes the phone to go offhook and dial the pre-
defined extension.
• Speed Dial/Xfer and Blind Transfer
When the phone is connected to a call, pressing the Speed Dial/Xfer key blind transfers the call to the predefined target.
If transferring a call fails, a message "Transfer Failed" displays, and you can reconnect the call (get the call back) by press-
ing the line key again.
• Speed Dial/Xfer and Call Forward
When the phone is in the "Ringing" state, pressing the Speed Dial/Xfer key forwards the call to the predefined exten-
sion.
Configuring a Speed Dial/Xfer Softkey
Use the following procedures to configure a Speed Dial/Xfer softkey on your phone.
IP Phone UI
1. Press on the phone to enter the Options List.
2. Press the <Softkeys> key. By default, all of the softkeys that display are configured as "None".
3. Press a <None> key. A softkey configuration screen displays.
4. In the "Type" field, press the <None> key. A screen displays with softkey keys.
5. Press the <Speed Dial/Xfer> function key to apply to the softkey.
6. In the "Label" field, enter a label to apply to this softkey.
7. In the "Value" field, enter the speed dial extension or the extension to transfer calls to (for example, "5551212")
8. In the "Line" field, press the
through 9.
41-001317-05 REV00 – 03.2011
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
or to select a line for which to apply to the softkey. Valid values are 1
Options Key
113