Table of Contents
Advertisement
C.
Upgrading Software
USB Upgrade Guideline
1. Connect the device and the PC with USB cable.
2. Prepare the windows control program:
The name of the upgrade software is VSP628_2014_Packge_xx.bin.
3. Open the device and make sure the device is in normal operation.
4. Open the windows control program:
5. User need not to install the driver, after the windows control program auto identification
the VSP 628PRO, the interface will show ―Down Load‖ button.
6. If the windows control program can not auto identification, the button is gray.
7. Click ―Select File‖ button, choose the upgrade path: VSP628_2014_Packge_xx.bin.
8. Click ―Down Load‖ button, and wait for the upgrade until finish.
9. The upgrade process lasts approximately 2~3 minutes. It will be prompted "Update OK"
dialog box when completion, please restart the device after upgrade.
VSP 628PRO
, shown as below:
User Manual
86
Advertisement
Table of Contents
