Table of Contents
Advertisement
6. System Setup and Operations
How to Realize WEB SERVER Cross-platform Setting
How to Realize WEB SERVER Cross-platform setting
First, the formation of LAN Remote Control Platform: one Ipad or one Iphone, one router
(with wireless functions, for example with a wireless-enabled VPN router models: Netcore
255 and 266. Volans VE760W, 982W.), one VSP 628PRO processor (can be more
processors, as long as the network interface can be connected to the router)
The first step: LAN
Physical Connection:
connect VSP 628PRO and routers by CAT5, and
connect routers by CAT5, please use the LAN Ethernet port, WAN port is only used to
connect to external networks, it's not allowed to use in this step.
Connection diagram is as below:
The second step: IP address setup. Please refer to IP Setup steps which in the ―How to
Realize LAN Remote Control Setting‖ section. (Make sure that processors IP address and
router IP address are in the same band.)
When users use Ipad or Iphone, you can directly use the Safari browser, enter the URL
192.168.0.100 (default) and run. If user using other types of devices will need to install the
kernel webkit browser such as: Apple Safari, Google Chrome or Maxthon browser. The
Installing package will provide Google Chrome browser (windows version).
The third step: Make connections.
Click
ico, run Google Chrome browser, open the page enter 192.168.0.100 (default)
and run.
VSP 628PRO
User Manual
72
Advertisement
Table of Contents
