Image - RGBlink VSP 628PRO User Manual

5. Communication Software Guideline
Software Operation

Image

In single mode, the interface is as follows:
Image 1
Choose the input source of image 1.
Scale the image by adjusting X, Y, Width and Height. Click ―Set‖ after finish.
Mask the top, bottom, left and right of the image. Click ―Set‖ after finish.
Choose the display mode as live or freeze.
Enable or disable the H Mirror or V Mirror function.
Set the hue of the image according to actual need. Click ―Set‖ after finish.
Set the chroma of the image according to actual need. Click ―Set‖ after
finish.
VSP 628PRO User Manual 53