RGBlink VSP 628PRO User Manual page 54

5. Communication Software Guideline
Software Operation
Set the color temperature of the image according to actual need. Click ―Set‖
after finish.
Set the brightness, including red, green and blue. Click ―Set‖ after finish. If
choose ―Sync‖, when drag one color, the other two color values will change
accordingly to the same value.
Set the contrast, including red, green and blue. Click ―Set‖ after finish. If
choose ―Sync‖, when drag one color, the other two color values will change
accordingly to the same value.
Click ―Take‖, the image will be switched to the LED display with seamless
effect.
Enable the gamma function and set the gamma value by selecting from
scrolling down list.
Set the ratio mode by selecting from scrolling down list.
VSP 628PRO User Manual 54