Table of Contents
Advertisement
6. System Setup and Operations
How to Realize the System Mode Setting
the knob to confirm, turn the knob, choose <Channel select>, turn the knob
to choose CHA or CHB, for example, choose CHB.
3. Push the [MENU] button to enter to menu items, choose <Input>, push the
knob to confirm, turn the knob, choose <Sizing Adjust>, set V size as 960.
4. Push the [MENU] button to enter to menu items, choose <Output>, push
the knob to confirm, turn the knob, choose <Channel select>, turn the knob
to choose CHA.
5. Push the [MENU] button to enter to menu items, choose <Input>, push the
knob to confirm, turn the knob, choose <Sizing Adjust>, set V size as 960,
and set V size as 960.
Multiple Synchronization Mapping
User need enable the Genlock function in <Output> option by pushing
[MENU] button before multiple synchronization, and then do signal
distribution and split, etc.
Switcher Setting
In this mode, the HDMI output is preview image, and the DVI and VGA output
is program image, preview signal can not support fade in fade out switch, and
program signal supports.
Same operation with stand mode, in this mode, user can switch the signal,
set the size and position, mask the image and adjust the dimmer and effects.
All the settings above are for preview, push [TAKE] button after setting, and
the preview image will be cut or fade in fade out to the program.
VSP 628PRO
User Manual
65
Advertisement
Table of Contents
