Views; Transition; System - RGBlink VSP 628PRO User Manual

4. Menu Orientation
Menu

Views

Push the [MENU] button, OLED shows the menu, turn the knob and select
<Views>, push the knob to confirm, show level 2 menu as follows:
SAVE TO: Push the [LEFT/RIGHT] button to choose the save channel.
Recall: Turn the knob to choose the recall the save mode.
Save: Turn the knob to choose the save channel, VSP 628PRO supports
23 kinds of save modes.
Delete: Delete the save mode.

Transition

Push the [MENU] button, OLED shows the menu, turn the knob and select
<Transition>, push the knob to confirm, show level 2 menu as follows:
Trans With: Can choose transition mode include Fade or Cut.
Trans Time: Set the transition time. The transition time adjustment range is
from 0 to 10S.

System

Push the [MENU] button, OLED shows the menu, turn the knob and select
<System>, push the knob to confirm, show level 2 menu as follows:
System Mode: VSP 628PRO supports 3 kinds of system modes, user can
choose the mode according to actual need:
Stand: In this mode, all the inputs are the same image, the same resolution,
and support fade in fade out switch. Each input signal supports scale,
effects setting independently.
Dual 2K: In this mode, the two channels output independently, CHA
outputs to DVI and VGA, CHB outputs to HDMI, CHA and CHB can input
any signal and set different resolutions, but can not support fade in fade out
switch. Each input signal supports scale, effects setting independently.
VSP 628PRO User Manual 43