Table of Contents
Advertisement
4. Menu Orientation
Menu
1280X1024@85, 1360X768@60, 1366X768@60, 1400X1050@50,
1400X1050@60, 1400X1050@75, 1440X900@60, 1440X900@75,
1440X900@85, 1600X1200@50, 1600X1200@60, 1680X1050@60,
1920X1080p@23.98, 1920X1080p@24, 1920X1080p@25,
1920X1080p@29.97, 1920X1080p@30, 1920X1080p@50,
1920X1080p@59.94, 1920X1080p@60, 1920X1080sF@23.98,
1920X1080sF@24, 1920X1080sF@25, 1920X1080sF@29.97,
1920X1080sF@30, 1920X1080i@50, 1920X1080i@59.94,
1920X1080i@60, 1920X1200p@50, 1920X1200p@60, 2048X1152p@60,
1920X1080@60.0 (Custom).
Area of Interest: Settings including as follows:
H Size: Width setting.
V Size: Height setting.
H/V Size: Zoom by the aspect of output resolution.
H Pos: Horizontal phase setting.
V Pos: Vertical phase setting.
Scaling Mode: Choose the scaling modes, including FULL, Same With
Input, 3:2, 4:3, 5:4 and 16:9.
Reset: If image quality distorts by improper operation, it can be recover by
reset.
Save: User can save the parameters after setting.
Recall AOI: Recall the saved parameters.
Full Size: User can set the image as full size.
Color Space/Sample/Bit: Can set the protocol as HDMI or DVI, default is
DVI output, HDMI signal output will enable when HDMI option checked.
Bits: Bit depth setting, system default as 8 bit for DVI signal, user need not
set it. And system default as 10 bit, user can also choose 8 bit or 12 bit.
Data range: DVI out range adjustment can choose RGB or YCBCR; among
them the RGB adjusting range is between 0~255, YCBCR adjusting range
VSP 628PRO
User Manual
41
Advertisement
Table of Contents
