Table of Contents
Advertisement
6.
System Setup and Operations
How to Realize the Test Pattern Setting
How to Realize the Test Pattern Setting
Push the [LOGO] button, user can set the test pattern, the settings are as
follows:
Type: Choose the test pattern type, including H RAMP, V RAMP, 100%
COL BAR, 75% COL BAR, 16*16 GRID, 32*32 GRID, BURST, 50% GRAY,
GRAY STEP1, GRAY STEP2, WHITE、BLACK, SMPTE COL BAR and
LOGO.
Raster Box: User can choose enable or disable the raster box function.
Diag Motion: User can choose enable or disable the diag motion function.
AOI Raster Box: User can choose enable or disable the AOI raster box
function. If choose ―ON‖, user can choose the types including Box X, Box Y,
Box Width and Box Height. If image quality distorts by improper operation,
it can be recover by reset.
VSP 628PRO
—>Type
Raster Box
Diag Motion
AOI Raster Box
User Manual
H RAMP
OFF
OFF
>>
68
Advertisement
Table of Contents
