Dual 2K Setting; Mapping Of Single Vsp 628Pro - RGBlink VSP 628PRO User Manual

6. System Setup and Operations
How to Realize the System Mode Setting
temperature, color correction, gamma, brightness, H sharpness, V
sharpness, noise reduction, Invert, Flip V, Flip H and Flip 90 Degree.
Note: User can also choose <Effects> in <Output> option by pushing the
[MENU] button for setting.

Dual 2K Setting

In this mode, the two channels output independently, CHA outputs to DVI and
VGA, CHB outputs to HDMI, CHA and CHB can input any signal and set
different resolutions, but can not support fade in fade out switch. Each input
signal supports scale, effects setting independently.
Same operation with stand mode, in this mode, user can switch the signal,
set the size and position, mask the image and adjust the dimmer and effects.
User need to choose the channel in <Channel Select> before setting.
For example, choose the signal of CHB, first, push the [MENU] button to
enter to menu items, choose <Output>, push the knob to confirm, turn the
knob, choose <Channel select>, turn the knob to choose CHB. Then choose
the signal, CHB will switch to the selected signal.
In addition, dual 2K can realize max 4K×1K mapping of single VSP 628PRO
and Multiple synchronization mapping, the operations are as follows:

Mapping of Single VSP 628PRO

When mapping of single VSP 628PRO, first, choose the same single for CHA
and CHB, then choose CHA or CHB in <Channel Select> option in <Output>
by pushing [MENU] button, and adjust the size according to actual need in
<Size Adjusting> option in <Input> by pushing [MENU] button.
Here, we take total width 1920, total height 1080, V split for example.
1. Choose the signal of CHA and CHB, for example, choose DVI.
2. Push the [MENU] button to enter to menu items, choose <Output>, push
VSP 628PRO User Manual 64