Using The Camera Toolbar; Using Quick Playback - FLIR M3100 SERIES Instruction Manual

9 Using the System
3
1 2
1. Main Menu.
2. Collapse.
3. Select display layout.
4. Sequence: Click to start/stop sequence mode.
5. PTZ: Click to open PTZ controls.
6. Camera: Click to open camera image settings.
7. Search: Search and playback recorded video. See 17.4 Playback, page 79.
8. Alarm Status: View alarms in progress. See 15.2.4 Alarm Status, page 45.
9. Channel Info: Click to access status information about connected cameras.
10. Network: Configure network settings for your system. See 15.3.1 Network, page 49.
11. HDD Manager: Manage hard drives connected to the system. See 15.3.16 Formatting the Hard
Drive, page 60.
12. USB Manager: Click to access options for connected USB thumb drives (not included). You can
backup video, logs, or system configurations and install firmware upgrades.

9.5 Using the Camera Toolbar

The Camera Toolbar is used to perform actions on a specific channel.
To access the Camera Toolbar:
• Move the mouse to the top of the channel display. The Camera Toolbar has the follow-
ing options:
1 2
1. Quick Playback.
2. Digital zoom.
3. Real-time backup.
4. Snapshot.
5. Mute/unmute audio.

9.5.1 Using Quick Playback

Quick Playback is used to playback the last 5~60 minutes of video from the selected chan-
nel. You can also access Quick Playback in split-screen mode, while still viewing live video
from the other channels.
To use Quick Playback:
1. Move your mouse to the top of the channel display and click
Note
By default, the system will begin playback from 5 minutes ago. You can increase this to up to 60 mi-
nutes using the Realtime Play setting in Main Menu>Setting>General.
2. Right-click to exit Quick Playback.
#LX400028; r. 1.0/16141/16141; en-US
4
4 5
3
5 6 7 8 9 10 11 12
.
19