Saving Your System Configuration To A Usb Flash Drive - FLIR M3100 SERIES Instruction Manual

15 Using the Main Menu
To configure other display settings:
1. From the Main Menu, click
2. Configure the following:
• Transparency: Select the menu transparency.
• Time Display: Check to show the time on the monitor.
• Channel Display: Check to show the channel names on the monitor.
• Image Enhance: Check for the system to digitally improve the video quality on the
live display. This setting does not affect recordings.
3. Click OK to save changes.

15.3.20 Saving Your System Configuration to a USB Flash Drive

The system allows you to save your current system configuration to a USB flash drive (not
included). This is useful if you want to backup your current settings.
Note
This function only saves settings created in system menus. It does not save or backup any video.
To save your system configuration to a USB flash drive:
1. Insert a USB flash drive (not included) into one of the USB ports.
2. From the Main Menu, click
3. Under Device Name, select the USB device where you would like to save the
configuration.
4. Click EXPORT to save your current system configuration.
#LX400028; r. 1.0/16141/16141; en-US
and then click Setting>Display>Display.
and then click Setting>Config Backup.
63