Formatting Hard Drives - FLIR M3100 SERIES Instruction Manual
M3100 series;
Hide thumbs
Also See for M3100 SERIES:
- Instruction manual (174 pages) ,
- Instruction manual (178 pages) ,
- Instruction manual (174 pages)
Table of Contents
Advertisement
21
M3100 Series Hard Drive Installation
4. Disconnect the SATA power and data cable from the hard drive.
5. Carefully turn the system over. Slide the hard drive and then lift it out of the system.
6. Replace the cover and cover screws (6x).
Note
After installation, you must format the hard drive in order to use it with the system. See 21.3 Format-
ting Hard Drives, page 158.
21.3 Formatting Hard Drives
You must format hard drives before you may use them with the system.
CAUTION
Formatting the HDD erases all data on the hard disk. This step cannot be undone. System settings will
not be erased.
To format the hard drive:
1. From the Main Menu, click
#LX400028; r. 1.0/16141/16141; en-US
and then click Storage>HDD Manager.
158
Hide quick links:
Advertisement
Table of Contents
