Using Digital Zoom In Live Display; Using Real-Time Backup; Using The Virtual Keyboard - FLIR M3100 SERIES Instruction Manual

9 Using the System

9.5.2 Using Digital Zoom in Live Display

1. Move your mouse to the top of the channel display and click
zoom. A check mark will appear in the icon to indicate digital zoom is activated.
Note
You may activate digital zoom in multiple channels at the same time.
2. Click and drag inside the channel to zoom in.
• Click and drag to pan the zoom area.
• Right-click to zoom out and select a new zoom area.
• Click to disable digital zoom. Note that the channel will remain at the same
zoom level until you right-click inside it.

9.5.3 Using Real-time Backup

Real-time backup allows you to save footage from the live display to a USB thumb drive
(not included) or external hard drive (not included).
To use Real-time Backup:
1. Insert the USB thumb drive or external hard drive into one of the USB ports on the
system.
2. Move your mouse to the top of the channel display and click
Backup.
3. Click again to end Real-time Backup. The file is saved to your USB device.
Note
If the system prompts you to log in, you will need to click
logging in.

9.6 Using the Virtual Keyboard

The Virtual Keyboard is used to input text or numeric values in certain menus.
1. Backspace.
2. Enter capital letters.
3. Confirm entry.
#LX400028; r. 1.0/16141/16141; en-US
to activate digital
to start Real-time
again to start Real-time Backup after
1
2 3
20