Tube Channel Assembly Replacement - Quadra-Fire 57ST-ACC Owner's Manual

R
E. Tube Channel Assembly Replacement
Removing Tube Channel Assembly
1. Remove the right side bricks (5 pieces) and right hand
rear brick.
2. Remove the 2 brick retainers by sliding back and then
up.
3. Remove the baffl e protection channel by rolling forward
and out of the fi rebox.
4. Locate the 2 channel nuts and 1 bolt inside of chamber
and remove using a 7/16 socket wrench.
NOTE: Soak the bolts with penetrating oil for at least 15 min-
utes before trying to remove them.
Bolt
Ceramic Blanket
Figure 25.1
November 28, 2011
5. Slide the tube channel assembly all the way to left until
6. The ceramic blanket and both baffl e boards can be
7. When the tube channel assembly is free of the left side
8. Re-install in reverse order.
Tube Channel Nuts
Tube Channel Assembly
Right Side
Rear Brick
6
1
1
Baffle Boards
Baffle Protection Channel
7038-159D
5700 Step Top Wood Stove Series ACC
it is off the threads. Drop the right side down, then slide
the assembly back to right.
removed at the same time you remove the tube channel
assembly.
support, rotate clockwise and pull assembly, blanket and
baffl es out through the front opening.
3
Side Brick
1
1
4
Brick Retainers
1
2
4
Rotate and
remove from
firebox
Page 25