Setting The Spool Of Thread; Extra Spool Pin; Winding The Bobbin; Removing The Bobbin - ELNA eXpressive 900 Instruction Manual

z
x

Setting the Spool of Thread

Open the top cover.
Lift up the spool pin. Place the spool of thread on the
spool pin.
Attach the large spool holder, and press it firmly against
the spool of thread.
NOTE:
Use the small spool holder to hold narrow or small spools
of thread.

Extra spool pin

Use the extra spool pin when you need to wind a bobbin
without unthreading the machine while working on a sew-
ing project.
Insert the extra spool pin into the hole in the foot
compartment as shown.
Place a spool of thread on the extra spool pin and fix the
spool with the spool holder.
NOTE:
The extra spool pin is also used for twin needle sewing.

Winding the Bobbin

Removing the bobbin

CAUTION:
Press the lockout key or turn the power switch off.
z Slide the hook cover release button to the right, and
remove the hook cover.
x Remove the bobbin from the bobbin holder.
NOTE:
Use the plastic bobbins for horizontal hook marked with a
"J"). Using other bobbins, such as pre-wound paper bob-
bins, may cause stitching problems and/ or damage to
the bobbin holder.
10