Ordinary Sewing Setting Mode; Needle Stop Position - ELNA eXpressive 900 Instruction Manual

q
w
e
r
t
y

Ordinary Sewing Setting Mode

q Auto thread tension
You can adjust the auto thread tension level by pressing
the "+" or "–" key.
Low bobbin thread warning
w
You can adjust the low bobbin thread warning level by
pressing the "+" or "–" key.
To turn off the low bobbin thread warning, press the "–"
key until "OFF" shows in the window.
e Auto thread cutting
The machine automatically trims the threads after sewing
locking stitches when this option is turned on.
Press the next page key to show the next menu.
r Start-Up Speed
The machine will start running slowly and the sewing
speed will gradually increase to maximum when pressing
the start/stop button.
You can select the desired start-up speed from slow,
normal or high by pressing the corresponding key.
t Needle Stop Position
The machine always stops with the needle in the down
position except when sewing buttonholes, specialty
stitches, monograms, etc. However you can change the
needle stop position to up by pressing the needle up key.
y Drop feed option
Turn this option on if you wish to sew decorative stitches
and sewing applications with the feed dog down.
Press the drop feed key to turn on this option.
Press the next page key to show the next menu.
91