Setting The Thread Cones Or Spools Of Thread; Setting The Spool Of Thread; Setting The Thread Cone - ELNA eXpressive 970 Instruction Manual

w
e
y
e
w
q
w
i
!0
t
r
q
w
e
u
o

Setting the Thread Cones or Spools of Thread

Felt rings of two sizes are provided to accommodate
various types of spools of thread and thread cones.
Use the large felt rings for large thread cones.
For small thread cones or spools of thread, insert the
small felt rings into the large rings.
q Spool of thread
w Spool pin
e Felt ring (large)
r Felt ring (small)
t Small spool of thread
y Spool pin for bobbin winding

Setting the spool of thread

Place the spool of thread on the spool pin, with the thread
coming out from the left backside.
Attach the spool cap and firmly press it against the spool.
w Spool pin
u Spool cap

Setting the thread cone

Attach the spool rests on the spool pins.
Place the thread cones on the spool pins.
Cover the thread cone with the spool net if the thread is
shaky or kinky when sewing.
If the net is too long for a spool, fold the net and place it
on the spool.
q Spool of thread
w Spool pin
i Spool rest
o Spool net
NOTE:
To prevent the thread from unraveling, leave the net on
the thread cone or hook the thread end into the notch
of the spool when it is not in use.
!0 Notch
10