w
q
e
r
t
Attaching the Embroidery Foot
Use the embroidery foot P for embroidery.
Turn the power switch on.
Raise the needle by pressing the needle up/down
button.
Press the lockout key and raise the presser foot with the
presser foot lifter.
q Lockout key
w Presser foot lifter
Loosen the thumbscrew with the screwdriver and remove
the foot holder.
e Thumbscrew
r Foot holder
Attach the embroidery foot P to the presser bar from
behind. Tighten the thumbscrew loosely by hand.
t Embroidery foot P
Lower the foot with the presser foot lifter.
Tighten the thumbscrew securely with the screwdriver.
99