Programming A Pattern Combination - ELNA eXpressive 900 Instruction Manual

q w e
r
r

Programming a Pattern Combination

t The patterns in the decorative stitch category and
monograms can be programmed to make a pattern
combination.
Press the program key and select as many patterns as
you wish to program.
You can program up to 100 patterns in each combination.
The images of programmed patterns are shown on the
left side of the LCD screen.
Mirror image of patterns
To sew or program the pattern as a mirror image, press
the vertical mirror key or horizontal mirror key, then select
the desired patterns.
NOTE:
Horizontal mirror image is available only for the specific
patterns. For pattern identification, these patterns are
shaded in blue on the reference chart inside the top cover.
To view the entire pattern combination, press the cursor
key to scroll over the pattern combination or press the
memory check key to show the entire pattern combination
at a glance.
r Cursor keys
Bridge Stitches
Bridge stitches are used for inserting straight stitches after
a stitch pattern.
If you want more space between French knots (D6), for
example, insert pattern BR10 after pattern D6.
Four counts of straight stitches are added to pattern D6.
NOTE:
Patterns BR9, BR10 and BR12 will inherit the stitch length
and needle drop position of the previous pattern in the
pattern combination.
60
q Program key
w Vertical mirror key
e Horizontal mirror key
t Memory check key