ELNA eXpressive 900 Instruction Manual page 131

i
o
!0
o-2
!1 - 1
!1
i Maximum embroidery speed
The maximum embroidery sewing speed can be set from
400 to 1000 spm in 100 spm intervals by pressing the "+"
or "–" key. (Sewing speed can be varied with the speed
control slider even while running the machine.)
NOTE:
Reduce the sewing speed when sewing patterns with
o-1
narrow zigzag stitches that tend to warp at high speeds.
o Hoop calibration
You can calibrate the center position of the hoops.
You need to enter embroidery mode before opening the
embroidery setting window.
Extend the carriage arm and press the YES key.
o-1 YES key
The carriage moves to the center position.
Press the hoop selection key to open the hoop selection
window.
o-2 Hoop selection key
Select the hoop and attach it to the carriage. Set the
template in the hoop.
Adjust the hoop position by pressing the jog keys so that
the needle is right above the hole in the template and
press the OK key.
!0 Resume mode
When Resume Mode is turned on, the last stitch sewn
before turning the power off will resume when you turn
the power on again.
When you turn the power on, the confirmation window
opens. Press the OK key to resume the last stitch of the
sewn pattern.
Press the next page key to go to the next menu.
!1 Thread selection
There are 7 types of embroidery thread to choose from.
Press the key of the thread you wish to use. The color
code of the selected brand is shown on the color/part key
along with the name of the color.
If you use imported embroidery stitch data containing
proper thread information, press the retain original color
key to retain this information.
!1 - 1 Retain original color key
Press the next page key to go to the next menu.
127