ELNA eXpressive 900 Instruction Manual page 117

q
1
2
3
w
Pattern tracing
You can check the size of the embroidery area by tracing
the pattern outline without stitching or with basting
stitches.
Press the trace key and the trace option window will open.
q Trace key
The following 3 options are available:
1. Trace without stitching
Press the key to open the trace without stitching
window.
Press the trace key
keys to move the hoop to a corner.
2. Trace and baste (single)
Press the key to open the trace and baste (single)
window.
Press the start/stop button to start tracing with basting
stitches.
3. Trace and baste (double)
Press the key to open the trace and baste (double)
window.
Press the start/stop button to start tracing with basting
stitches. First, the machine bastes inside the pattern then
traces the pattern outline with basting stitches.
NOTE:
The machine will baste around the embroidery area with
a 5 mm allowance.
However, the allowance will be null if the pattern spreads
over the maximum limit of embroidery area.
To close the tracing option window, press the X key.
Hoop back key
Raise the needle by pressing the needle up/down key, if
the needle is in down position.
Press the hoop back key and hoop back option window
will open.
Press the key to move the carriage back to the home
position and return to the ordinary sewing mode, or press
one of the
standby position.
Press the X key to close the hoop back option window.
w Hoop back key
The hoop will go back to the home position when pressing
the start/stop button.
113
to start tracing or press one of the
keys to move the carriage to a