(A)
q
(B)
w
e
r
w
e
q
Setting the Spool of Thread
Setting the spool
Place a spool of thread on the spool pin with the thread
coming off the spool as illustrated.
A: Press the large spool holder firmly against the spool
of thread.
q Large spool holder
B: For a small spool, use the small spool holder.
w Small spool holder
Extra spool pin
Use the extra spool pin when you need to wind a bobbin
without unthreading the machine while working on a
sewing project.
Insert the extra spool pin into the hole.
Place a spool of thread on the spool pin with the thread
coming off the spool as illustrated.
e Extra spool pin
r Hole for extra spool pin
Bobbin Winding
Removing the bobbin
Gently slide the hook cover release button to the right
and remove the hook cover plate.
Lift out the bobbin.
q Hook cover release button
w Hook cover plate
e Bobbin
NOTE:
Use the plastic bobbins that come with the machine
(Part #102261000). Using other bobbins, such as pre-
wound paper bobbins, may cause stitching problems
and/ or damage to the bobbin holder.
11.5 mm
15