Setting Up Gps; Resetting The Device; Restoring User Defined Settings To The Device; Resetting The Device To Factory Defaults - Multitech MultiConnect rCell 100 Series User Manual

For CDMA devices, you can use the router's web interface to activate the account.

Setting up GPS

If your model can support a GPS, see the online help file for information on working with a GPS.

Resetting the Device

You need:
■ A pin, paperclip, or similar thin object that can fit into the reset hole
To reset the device:
1. Find the hole in the panel labeled RESET. The reset button is recessed into the case.
2. Use the pin to quickly press and release the RESET button.
The device reboots.

Restoring User Defined Settings to the Device

You can restore user defined settings to your device.
You need:
■
A pin, paperclip, or similar thin object that can fit into the reset hole
1. Locate the hole in the panel labeled RESET. The reset button is recessed into the housing.
2. Use the pin to press in the button for about 3 seconds and then release the reset button.
■ If you do not press in the button long enough, the device will reset, but the user defined settings will
not be restored.
■
If you hold it too long, factory default settings will be restored. The device reboots with user-defined
configuration settings restored.

Resetting the Device to Factory Defaults

You can reset the device to clear custom configuration settings and replace them with default configuration
settings. Default settings can include OEM specific settings.
You need:
■
A pin, paperclip, or similar thin object that can fit into the reset hole
To reset the device to factory default settings:
1. Find the hole in the panel labeled RESET. The reset button is recessed into the case.
2. Use the pin to press and hold the reset button until the Status LED becomes solid.
3. Release the button for the reset to complete
The device reboots.
®
MultiConnect rCell 100 Series Router User Guide
INSTALLING AND USING THE ROUTER
17