DEVI DEVIreg Touch Installation Manual page 6

Sensor failure moni-
toring
Cable specification
max.
Ball pressure test
temperature
Pollution degree
Controller type
Software class
Storage temperature
IP class
Protection class
Dimensions
Weight
Electrical safety and Electro-Magnetic Compatibility for this
product is covered by the compliance with the EN/IEC
Standard "Automatic electrical controls for household and
similar use":
▪ EN/IEC 60730-1 (general)
▪ EN/IEC 60730-2-9 (thermostat)
6
The thermostat has a built-in
monitoring circuit, which will
switch off the heating if the sen-
sor is disconnected or short-
circuited
2
1x4 mm or 2x2,5 mm
75°C
2 (domestic use)
1C
A
-20°C to +65°C
21
Class II -
85 x 85 x 20-24 mm (in-wall
depth: 22 mm)
103 g
DEVIreg™ Touch
2
Installation Guide