6.
On the SETUP informa-
tion screen, press
start.
7.
Use the < and > arrows
to select whether only a
floor sensor or a combi-
nation of room and floor
sensors should be used.
Press
Note: A "room only" option may also be available.
For details, see the "Maximum Floor Temperature"
section.
8.
Use the < and > arrows
to select the installed
floor sensor type. (Meas-
ured resistance and cor-
responding temperature
are shown in brackets).
Press
14
to confirm.
to confirm.
DEVIreg™ Touch
to
Installation Guide