Charging The Battery - Hytera TC-320 User Manual

(446mhz) two-way radio
Hide thumbs Also See for TC-320:
Table of Contents

Advertisement

Battery Information
batteries: 6 months), to avoid battery capacity reduction due to over-
discharge.
3. Store your battery in a cool, dry place under room temperature, to reduce
self-discharge.

Charging the Battery

When the Status Indicator flashes red and an alert tone sounds at intervals of
ten seconds indicating the battery power runs low, please recharge the battery.
Use only the charger specified by the manufacturer. The Charge Indicator
indicates the charging progress.
Please follow these steps to charge your radio using the switching power
or charger:
Note: Make sure the radio is attached with a battery before charging, and is
powered off during charging.
1. Plug the AC connector of the switching power into the AC outlet socket.
2. Plug the Mini USB connector of the switching power into the Mini USB jack
of the radio or charger.
3. Place the radio with the battery attached in the charger when the charger
indicator glows green to indicate the power supplies normally. (Please skip
this step if you don't use a charger)
4. Make sure the radio is connected to the switching power or the charger.
The charging process initiates when the Charge Indicator of the radio
glows red.
5. The Charge Indicator glows green when the battery is fully charged.
Please remove the radio then.
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents