Before Use; Charging The Battery; Attaching The Belt Clip - Hytera AP51X User Manual

3. Before Use

3.1 Charging the Battery

 Use the approved charger to charge the battery.
 Read the Safety Information Booklet before charging.
 The remaining lithium-ion battery power is limited to 30% pursuant to the new lithium battery shipment
regulation approved by the International Air Transport Association (IATA).
Use the USB Type-C cable to connect the radio with battery attached to the power adapter, power bank, or PC.
The LED indicator on the radio shows the charging status, as described in the following table.
LED Indicator
Glows red
Flashes red rapidly
Glows green

3.2 Attaching the Belt Clip

Align the holder on the belt clip with the groove on the battery, and then press the belt clip downwards into place.
You can press and hold the belt clip spring plate and push the belt clip upwards to remove it.
The battery is being charged.
The battery fails to be charged.
The battery is fully charged.
8
Charging Status