Before Use; Charging The Battery; Attaching The Battery - Hytera PT350 User Manual

3. Before Use

3.1 Charging the Battery

 Use the approved charger to charge the battery.
 Read the Safety Information Booklet before charging.
 The remaining lithium-ion battery power is limited to 30% pursuant to the new lithium battery shipment
regulation approved by International Air Transport Association (IATA). Before initial use, charge the
battery.
Before initial use, make sure to charge the battery. You can charge either the standalone battery or the terminal with
battery attached. It is recommended that the terminal remain powered off during charging.
The LED indicator on the charger shows the charging status, as described in the following table:
Indicator
Glows red
Glows orange
Glows green
Flashes red rapidly
Flashes red slowly

3.2 Attaching the Battery

 Use the approved battery to avoid explosion during battery replacement.
 Dispose of the used battery according to "Precautions for Disposal" in the Safety Information Booklet.
Insert the tabs at the battery's top part into the slots at the terminal's top part, and then press the battery latch and
push the battery into the terminal until a click is heard.
Charging Status
The battery is being charged.
The battery is charged to 90% or above.
The battery is fully charged.
The battery fails to be charged.
No battery is placed on the charger.
10