Dma Transfer Failure; Overflow On Loop Back Write; Jbig Library Other Failure; Marker Code Detect Failure - Panasonic DP-C321 Service Handbook

003-364 DMA Transfer Failure

BSD on : CH12.2C
[Detection Conditions]
After data is input for compression/extension, the
compression/extraction is not completed.
[Actions]
Turn the power On/Off and perform the following if
the problem persists.
(1) Replace the RAM. (PL13.1)
(2) Run DC355 Diag. If the problem persists, replace
the HDD (PL13.1).
(3) ESS PWB (PL13.1)

003-365 Overflow on Loop Back Write

BSD on : CH12.2C
[Detection Conditions]
The extended data exceeds the reserved buffer size.
[Actions] This failure is currently not displayed.

003-366 JBIG Library Other Failure

BSD on : CH12.1
[Detection Conditions] This is currently not in use.
[Actions]
Turn the power On/Off and perform the following if
the problem persists.
(1) ESS PWB (PL13.1)
3-13

003-370 Marker Code Detect Failure

BSD on : CH12.2C
[Detection Conditions]
When only the specified size data is extended, the end
code (FF02) cannot be found in the compressed data.
[Actions]
Turn the power On/Off and perform the following if
the problem persists.
(1) Replace the RAM. (PL13.1)
(2) Run DC355 Diag. If the problem persists, replace
the HDD (PL13.1).
(3) ESS PWB (PL13.1)

003-600 Repair the Billing Master Counter

BSD on : CH3.6A
[Detection Conditions] The Billing Master Counter is
repaired automatically.
[Actions] Only record the data to the History. (Hidden
Failure)

003-601 Repair the Billing Master Counter 1

BSD on : CH3.6A
[Detection Conditions] The Billing Master Counter 1 is
repaired automatically.
[Actions] Only record the data to the History. (Hidden
Failure)

003-602 Repair the Billing Master Counter 2

BSD on : CH3.6A
[Detection Conditions] The Billing Master Counter 2 is
repaired automatically.
[Actions] Only record the data to the History. (Hidden
Failure)

003-747 Print Instruction Failure

BSD on : CH12.2C
[Detection Conditions] The specified print parameter is
incorrect.
[Actions] Change the print parameter and print again.

003-750 Short of Originals in As Book

BSD on : CH6.12B
[Detection Conditions] Insufficient number of document
pages for As Book
[Actions] Set the number of pages to the maximum
number of pages that can be stored or less.

003-760 Invalid Scan Job Parameter

BSD on : CH6.12B
[Detection Conditions]
Job parameter mismatch
The Job properties are incorrect.
[Actions] No actions required.

003-761 Tray Select Error

BSD on : CH6.12B
[Detection Conditions]
Tray selection error (The paper sizes are different
between the tray that is already selected and the tray
that will be selected by the APS.)
[Actions] Select a appropriate tray.
Chapter 3 Troubleshooting