Stacker Capacity; Dadf Specifications; Machine Dimension And Basis Weight; Installation Space - Panasonic DP-C321 Service Handbook

Applicable Paper
11 x 17" SEF, 8.5 x 11" LEF
8.5 x 14" SEF, 8.5 x 13" SEF, 8.5 x 11" SEF
8 x 10" SEF
(Fig. 9) j0mf61008
(Fig. 10) j0mf61009
1-13
A (inch) B (inch)
273.4 62.9
209.9 -
248 -

1. 1. 21. 8 Stacker Capacity

The Stacker can store the following number of sheets (Single Side).
• Paper of 8.5 x 11", or smaller: 1000 sheets
• Paper larger than that: 500 sheets
• Mixed Stack: 300 sheets
The Mixed Stack represents paper larger than the previous one in both width and length
directions is stacked.
After installing the Finisher, the capacity of the Face Up Tray of the IOT is restricted as
follows.
• 8.5 x 11" LEF: 200 sheets (Plain 20 lb Paper)
• 11 x 17" SEF: 150 sheets (Plain 20 lb Paper)

1. 1. 22 DADF Specifications

1. 1. 22. 1 Machine Dimension and Basis Weight

Refer to 1. 1. 1.

1. 1. 22. 2 Installation Space

Refer to 1. 1. 2.

1. 1. 22. 3 Electrical Specifications

Power Consumption: 11.5 WDC (1-Sided), 14 WDC (2-Sided)
The power is supplied from the IOT connected. (+5 VDC, +24 VDC)

1. 1. 22. 4 Paper Size

Document size that can be fed
Maximum: 11.7 x 17"
Minimum: 5.8 x 8.3"

1. 1. 22 .5 Document Weight

Document weight that can be fed
10~34 lb (For the 2-Sided mode, 13~29 lb)
Chapter 1 General