Table of Contents
Advertisement
Secure Lock
(Disabled by default.) Before your vehicle can be remote-started, the factory security system must
first be disarmed. The Secure Lock feature may be required on certain vehicle models with factory
security systems that automatically unlock the doors when the security system is disarmed.
To keep your vehicle protected when the factory security system is disarmed for a remote start,
Secure Lock will relock your doors as soon as the vehicle is started. Once the engine is shut down
by remote or after its runtime has expired, Secure Lock will also rearm your factory security system
and relock the doors.
"Home Valet
TM
" Mode
If configured at installation, this feature will remotely set the vehicle to a no-remote-start mode: if
the vehicle is parked indoors there is no danger of it starting accidentally by remote control. If the
vehicle has a manual transmission, it should be set into ready mode before activating the Home
Valet™.
Note: Once the Home Valet Mode is activated, the vehicle will not start by remote, but the alarm
functions will remain active.
To take the system into home valet mode:
1.
Press the
or
button.
2.
Within 3 seconds, press the
3.
The transmitter will beep once and the
To take the system out of home valet mode:
x
Turn the ignition key to the IGNITION ON (RUN) position.
The system will warn you if someone attempts to start your vehicle while it stands in home valet
mode. The parking lights will:
Turn ON then OFF; then
Flash twice, pause; then
Flash twice again.
Safe Start
This feature will eliminate accidental remote starts, e.g. when children are playing with the
transmitter.
Safe start enabled: If this feature is enabled, the user must press the
3 seconds to remote-start the vehicle.
Swap start: If this feature is enabled;
2-way remote:
1.
Through the remote's advanced function menu (page-6), select L-01.
2.
Press
to remote start the vehicle.
The AUX 2 output can be activated by pressing the
1-way remote:
1. Rapidly press AUX twice. While the remote's LED is flashing, press
vehicle.
Note: The AUX 2 output can be activated by pressing the
P.18
and
buttons simultaneously
icon will display.
button twice within
button.
to remote start the
button.
User Guide
Advertisement
Table of Contents
