Arming And Disarming Of The System; Intrusion Alert Via Remote - Directed Electronics SmartStart User Manual

Two-way lcd automatic/manual transmission remote starter with full alarm system
Hide thumbs Also See for SmartStart:
Table of Contents

Advertisement

Arming and disarming of the System

The Alarm can be configured by the installer either to Passive Mode (so as to arm automatically)
or Active Mode (so as to require the user's intervention for arming). By default, the Remote Car
Starter is configured to Passive Mode.
Passive mode:
To arm the alarm, press the
button on the transmitter, OR
1.
In Passive Mode, the alarm will automatically arm 30sec once the last door is closed.
2.
The LED on the antenna will flash quickly during the countdown preceding the activation
of the system.
3.
Once the activation countdown expires, the siren will chirp once and the LED will flash
slowly to indicate that the alarm is now armed.
To disarm the alarm, press the
button on the transmitter.
1.
The LED on the antenna will flash quickly during the countdown preceding the activation
of the system.
2.
The alarm will automatically rearm itself after 30 sec. if no door is left opened and the
ignition is not turned ON.
Active Mode:
To arm the alarm, press the
button on the transmitter.
1.
The siren will chirp once.
2.
The LED on the antenna will flash slowly.
To disarm the Alarm, press the
button on the transmitter.
1.
The siren will chirp twice.
2.
The LED on the antenna will remain OFF.

Intrusion alert via remote

The remote will beep or vibrate for about 60 seconds when an intrusion from door, hood, trunk,
shock or ignition is detected. At the same time, the LCD remote will display "ALARM" and "DOOR /
HOOD / TRUNK / SHOCK / real time" (depending on the type of alarm) alternately. The icons of
door, hood, trunk and shock, as well as the red backlight, will be flashing (when the BLITE is set
ON).
Alarm Type
LCD Text
DOOR
ALARM + DOOR
HOOD
ALARM + HOOD
TRUNK
ALARM + TRUNK
SHOCK
ALARM + SHOCK
IGNITION
ALARM + real time
User Guide
Icon
Sound or Vibration
60 seconds
60 seconds
60 seconds
60 seconds
NONE
60 seconds
P.11

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SmartStart and is the answer not in the manual?

Questions and answers

Table of Contents