Temporary Chirp Delete; Relock; Missing A Start Or A Stop Confirmation; Advanced Features: Installation-Programmable Options - Directed Electronics SmartStart User Manual

Temporary Chirp Delete

To temporarily disable the chirp confirmations of the siren upon arming and disarming (e.g. in a
quiet neighbourhood):
x Press the
button. The remote will beep once.
x Immediately, press the
or

Relock

If you unlock the doors with the remote transmitter, but do not open any door, hood, trunk or turn
ignition ON within 30 seconds, the system will automatically relock and arm.
Note: When the system is in active arming mode and the relock mode is enabled, the doors will
relock but the system will not rearm.

Missing a Start or a Stop Confirmation

If you have not received a Start or the Stop confirmation after pressing the
button within range of the remote starter's signal will refresh the display and will confirm if the
vehicle was started or stopped.
If no Start Confirmation Was Received:
x
Press the button:
¾
The remote's icon will start flashing
¾
The icon and runtime time countdown will be displayed.
If no Stop Confirmation Was Received:
x
Press the button:
¾
The will be displayed
¾
The remote's icon and the runtime countdown will disappear.
Advanced Features: Installation programmable Options
The remote starter was designed with flexibility and OEM integration in mind. With its program-
mable options, this unit can single-handedly control nearly any electrical system in your vehicle.
Caution: The programming of your system should be left to a professional. Changing any one of
the settings may affect the operation of your remote starter.

Ignition Controlled Door Locks

This is an added security feature. If your Remote Car Starter was installed with the Ignition-
Controlled Door Locks option, the doors will automatically lock as soon as the ignition key is turned
to the IGNITION ON (RUN) position while the brakes are pressed. The remote car starter will also
lock any door that was unlocked and opened (then closed) the next time the brake pedal is pressed
(only when doors are monitored). When the key is turned to the OFF position, the doors will
automatically be unlocked.
User Guide
button to arm or disarm system without any chirp.
button, pressing the
P.17