Multi-Level Features (Default State) - Directed Electronics SmartStart User Manual

¾ ¾
Press : ................................................. LOCK
¾ ¾
Press : .................................................. UNLOCK
¾ ¾
Press : ................................................. START
¾ ¾
Press : ................................................. STOP
¾ ¾
Press : ................................................ TRUNK
Note: Your remote control must be configured for second car operation by the installer.
Multi Level Features (default state)
The multi-level features allow you to access different features of your vehicle or of a second car by
pressing the button once, twice or three times. For convenience purpose, the order of
LEVELS and MENU can be re-arranged through FBPRO setting (page-6)
Features:
x
MENU: see page-6 for complete lists of MENU available.
x
Basic features: AUX-2, Cold Weather mode, Swap Start, Temperature request
x
Multicar Operation: Allows the owner to control both vehicle equipped with the same
remote starter model.
To control the Multi level features, refer to the tables below:
FBPRO setting 1 *default
FBPRO
Features Levels
setting
M MENU MENU
1 Basic features L01
2 Multi car operation L02
3 N/A L03
FBPRO setting 3
FBPRO
Features Levels
setting
2 Multi car operation L01
3 N/A L02
1 Basic features L03
M MENU MENU
User Guide
FBPRO setting 2
FBPRO
Features Levels
setting
1 Basic features L01
2 Multicar operation L02
3 N/A L03
M MENU MENU
FBPRO setting 4
FBPRO
Features Levels
setting
3 N/A L01
1 Basic features L02
2 Multicar operation L03
M MENU MENU
P.21