Table of Contents
Advertisement
x
The parking lights will flash slowly 3 times then remain lit.
To stop the vehicle at any moment, simply press the
out once per remote start.
Example: If your Module is programmed for a runtime of 3 minutes and your vehicle has been
running for 2 minutes already, pressing the
will run for another cycle (in this case, 3 minutes).
Disable/Enable LED flashing
To Disable the LED:
Press
and
times.
To Enable the LED:
Press
and
Constant output
x
Pressing and holding the
button for more than 3 seconds will lock all doors and will
send a constant pulse as long as the
This constant pulse can be configured to activate certain functionalities such as rolling up
the windows – Please refer to your installer to see if your vehicle is compatible with
this option.
x
Pressing and holding the
button for more than 3 seconds will unlock all doors and will
send a constant pulse as long as the
This constant pulse can be configured to activate certain functionalities such as rolling
down the windows – Please refer to your installer to see if your vehicle is compatible
with this option.
Advanced Features: Installation programmable Options
The Remote Car Starter was designed with flexibility and OEM integration in mind. With its
programmable options, this unit can single-handedly control nearly any electrical system in your
vehicle.
Caution
: The programming of your system should be left to a professional. Changing any
one of the settings may affect the operation of your Remote Car Starter.
Ignition controlled Door Locks
This is an added security feature. If your Remote Car Starter was installed with the Ignition-
Controlled Door Locks option, the doors will automatically lock as soon as the ignition key is turned
to the IGNITION ON (RUN) position while the brakes are pressed. The remote car starter will also
lock any door that was unlocked and opened (then closed) the next time the break pedal is
pressed. When the key is turned to the OFF position, the doors will automatically be unlocked.
Secure Lock
(Disabled by default.) Before your vehicle can be remote-started, the factory security system must
first be disarmed. The Secure Lock feature may be required on certain vehicle models with factory
security systems that automatically unlock the doors when the security system is disarmed.
To keep your vehicle protected when the factory security system is disarmed for a remote start,
Secure Lock will relock your doors as soon as the vehicle is started. Once the engine is shut down
by remote or after its runtime has expired, Secure Lock will also rearm your factory security system
and relock the doors.
P.10
button. This procedure can only be carried
button will reset the counter to zero and the Engine
simultaneously until the parking lights flash three
simultaneously until the parking lights flash once.
button is held down (maximum of 15 seconds).
button is held down (maximum of 15 seconds).
User Guide
Advertisement
Table of Contents
